As-Built Drawings: What They Are, What’s Included & How to Get Them

A person’s hands reviewing architectural floor plan drawings on a wooden desk.

Ask an architect or facilities manager for the drawings of an existing building and you’ll often hear the same thing: there aren’t any, or the ones on file are decades out of date and no longer match the walls in front of you. That gap — between what’s on paper and what was actually built — is exactly what as-built drawings close.

This guide explains what as-built drawings are, how they differ from design drawings, what a full set includes, and the two ways they’re produced — including how a measured building survey turns an existing building with no reliable plans into accurate, up-to-date as-built CAD.

As-built drawings are a set of drawings that record a building exactly as it was actually constructed — its real dimensions, layout and features — rather than as it was originally designed. Also called record drawings, they capture every change made during construction (or every feature of an existing building), and are supplied as scaled CAD drawings: floor plans, elevations and sections.

Key takeaways

  • As-built drawings show a building as actually built, not as designed — they’re also known as record drawings.
  • A set typically includes floor plans, elevations, sections, a roof plan and a site plan, as CAD (DWG) and usually PDF.
  • They’re produced two ways: from a contractor’s marked-up ‘red-line’ drawings at hand-over, or — for an existing building — from a measured survey / 3D laser scan.
  • You need them for renovations, extensions, retrofit, change of use, planning, lease plans and facilities management.
  • Accuracy follows the RICS measured-survey standard, with the point cloud able to feed a BIM / Revit model (scan-to-BIM).

What are as-built drawings?

A hand holds a pen and points to a detail on an illuminated architectural floorplan.

As-built drawings are a definitive record of a building as it physically exists — the real positions, dimensions and construction of its walls, openings, floor levels and key features. 

They differ from the drawings an architect issues to build from, because buildings change: dimensions shift on site, services get rerouted, and decades of alterations leave a finished building that no longer matches its original plans.

The term you’ll also hear is record drawings — in practice the two mean the same thing: an accurate, up-to-date drawn record of what is actually there. For an existing building with no reliable plans, that record is created by measuring the building itself, which is where a measured survey comes in.

As-built drawings vs design drawings: what’s the difference?

Design drawings show what was planned and are produced before construction to build from. As-built drawings show what was actually built and are produced after — or, for an existing building, from a survey of it now — as a definitive record for everyone who works on the building later.

Design drawingsAs-built drawings
ShowsWhat was planned / intendedWhat was actually built
ProducedBefore constructionAfter construction, or from a survey of an existing building
PurposeTo build fromA definitive record to work from later
Reflects changes?No — the original schemeYes — every field change and alteration
Used byThe design and construction teamOwners, facilities managers, architects, engineers, surveyors

What’s included in a set of as-built drawings?

A set of as-built drawings usually includes scaled floor plans, external and internal elevations, cross-sections, a roof plan and a site/location plan, supplied as CAD (DWG) and PDF. On larger or technical projects it extends to structural and building-services (M&E) layouts, and can include a 3D model.

Exactly what you receive is agreed up front and depends on the building and what you’re doing with it. A typical set covers:

DrawingWhat it recordsFormat
Floor plansWalls, openings, room layouts, dimensions and floor levels, as builtDWG + PDF
ElevationsExternal facades and internal wall faces — windows, doors, features, heightsDWG + PDF
SectionsVertical cuts through the building: storey heights, floor-to-ceiling, structural depthDWG + PDF
Roof planRoof shape, pitches, ridges, valleys, plant and rooflightsDWG + PDF
Site / location planThe building’s footprint and position relative to boundaries and site featuresDWG + PDF
Services (M&E)Where specified: drainage, mechanical and electrical layoutsDWG
3D model / point cloudA Revit/IFC model or the raw laser-scan dataset, where the project needs itRVT / IFC / point cloud

CAD drawings are issued in the formats design teams work in directly — typically DWG, with PDF for review and sharing, and RVT or IFC for modelled deliverables. The site plan ties the building to its surroundings; where that extends to levels and boundaries, it overlaps with a topographical survey.

How are as-built drawings produced?

Two ways. On a construction project, the contractor marks changes onto the working drawings (‘red-lines’), which are drafted into a clean as-built set at hand-over. For an existing building with no reliable drawings, a surveyor captures it with 3D laser scanning and total stations and draws the as-builts from the data.

Two modern high-rise residential towers under construction at TwelveTrees Park, surrounded by green hoarding with developer and Mayor of London branding.

Route 1 — from construction. During a build, the contractor records every deviation from the design set on the working drawings, traditionally in red pen (hence ‘red-lines’). At completion, those marked-up sheets are drafted into a clean, accurate as-built set that reflects the finished building, including change orders and field adjustments.

Route 2 — from a measured survey (the common case for existing buildings). 

When there are no drawings, or the ones on file no longer match reality, the building is measured directly. 

A surveyor sets out control, captures the structure with 3D laser scanning (and total stations), registers the scans into a single point cloud, and CAD technicians draw the as-built plans, elevations and sections from that dataset. 

This is how a measured building survey produces as-built drawings — and it’s the route most renovation, refurbishment and acquisition projects actually need. For the full process, see our step-by-step guide to measured building surveys.

Accuracy on the survey route follows the RICS professional standard Measured surveys of land, buildings and utilities, which sets the survey accuracy band agreed before work starts. Agreeing the scale, level of detail and band up front — and whether you want CAD, a point cloud, a model, or all three — is what keeps the deliverable fit for purpose.

When do you need as-built drawings?

Whenever a decision about an existing building depends on an accurate record of it — most commonly renovations and extensions, retrofit, change of use, planning applications, lease plans, and ongoing facilities and asset management.

If an architect, engineer or contractor is about to work on a building, they need to design from what’s actually there, not a guess. The common triggers:

TriggerWhy as-built drawings matter
Renovation & refurbishmentGive the design team accurate existing layouts so new work fits the real space — avoiding changes that don’t fit and costly surprises on site.
Extensions & alterationsPrecise dimensions and levels let the new design tie cleanly into the existing structure and services.
Retrofit & MEP upgradesHeating, electrical and drainage work needs to know where the existing building and its services actually run.
Change of useConverting or reconfiguring a building needs a reliable record of what’s there before you can plan what it becomes.
Planning & lease plansAccurate existing-condition drawings support planning submissions and lease / area plans.
Facilities & asset managementOwners and FM teams run buildings from an accurate record — space, assets and maintenance all depend on it.

As-built drawings and BIM (scan-to-BIM)

The same 3D laser-scan point cloud used to draw as-built CAD can be turned into a BIM model — an intelligent Revit or IFC model of the existing building. This ‘scan-to-BIM’ route gives design and FM teams a coordinated 3D record, not just 2D sheets.

For straightforward projects, 2D as-built CAD (DWG + PDF) is all you need. 

For complex buildings, coordination-heavy refurbishments, or asset owners who manage their estate in BIM, the point cloud feeds a 3D / BIM model instead — capturing the building once, comprehensively, so any plan, section or level can be taken from the dataset later without a return visit. 

Because the building is measured to a known accuracy band, the model is a reliable digital twin of what’s actually there.

How much do as-built drawings cost?

Cost depends on the building’s size and complexity, the level of detail, the accuracy band, and the deliverables — 2D CAD only, or a point cloud and BIM model as well. There’s no flat rate, so as-built drawings are quoted per project.

The main drivers are floor area, number of storeys, how intricate the building is (period and heritage buildings take longer), the survey accuracy band, and whether you need 2D drawings, a point cloud, or a full BIM model. 

Where the as-builts come from a measured survey, the cost is the cost of that survey — we set out the full breakdown in our measured building survey cost guide. 

The reliable way to budget is a fixed, no-obligation quote based on your actual building and what you need the drawings for.

Frequently asked questions

As-built drawings are a set of drawings that record a building exactly as it was actually constructed — its real dimensions, layout and features — rather than as it was originally designed. They’re supplied as scaled CAD drawings (floor plans, elevations, sections) and are also known as record drawings.

In practice, yes. Both terms describe an accurate drawn record of a building as it actually exists. ‘As-built’ is the more common term on construction and survey projects; ‘record drawings’ is often used once a set is finalised and archived.

Typically CAD — DWG files that design teams can work in directly — plus PDF for review and sharing. Where a 3D deliverable is needed, you also get a Revit (RVT) or IFC model and, if requested, the raw laser-scan point cloud.

By measuring the building itself. A surveyor sets out control, captures the structure with 3D laser scanning and total stations, registers the scans into a single point cloud, and CAD technicians draw the as-built plans, elevations and sections from that dataset — i.e. a measured building survey.

Accuracy is set by the survey accuracy band agreed before work starts, under the RICS measured-survey standard. Building drawings are usually produced to tolerances suited to 1:50–1:100 scale, with tighter bands available for heritage or engineering work.

Yes. The 3D laser-scan point cloud captured for the drawings can be used to build an intelligent Revit or IFC model of the existing building — a process called scan-to-BIM — giving a coordinated 3D record for design and facilities management.

Need as-built drawings of an existing building?

Blackacre’s RICS-regulated surveyors produce accurate as-built CAD drawings — plans, elevations, sections, point clouds and BIM models — from a measured survey of your building. Across London, Surrey and Sussex.